General Equipment Company

Owatonna, MN

At-a-glance

Years in business:Since: 1955

Number of employees:11-50

Contact

620 Alexander Dr, SW

Owatonna, MN

US

https://www.generalequip.com/

Phone:(507) 451-5510

Toll Free:800-533-0524

Fax:(507) 451-5511

More info on General Equipment CompanyIt began with the simple idea . . . apply basic mechanical principles and common sense to solve a problem. For over 50 years General Equipment Company has delivered quality product that save you time and money resulting in higher ROI.

How To Choose The Right Hand Held Hole Digger

How To Choose The Right Hand Held Hole Digger

How To Operate a 242H Hole Digger

How To Operate a 242H Hole Digger

How To Operate a 332H and 348H Hole Digger

How To Operate a 332H and 348H Hole Digger

Concrete Contractor's 2023 Top Products Winners

Award winners of Concrete Contractor magazine's 2023 Top Products.

Always consult your machine's operator’s manual for details on the specific surface grinder being used.

Basic Guidelines on Choosing the Right Surface Grinder Attachment

There’s no substitute for experience, but these basic guidelines can help with choosing the proper type of attachment for your surface grinder.

Successful Surface Grinding - What to Know

Simplify the Daily Grind

Work smarter, not harder, with the right surface grinder. Here's what you need to know.

Contractors will have a much more pleasant experience operating their low-speed surface grinders if they are aware of proper operating techniques.

Surface Grinder Do's and Don’ts

With the introduction of high-speed diamond grinders in recent years, many contractors have tossed other types of equipment aside, hoping that the new, flashy machines will be a catch-all for concrete polishing and grinding applications.

Rentallandscape 11301888

What's New on the Rental 'Landscape'?

Several challenges and changes have presented themselves to landscape contractors and equipment manufacturers in recent years. What hasn’t changed is that contractors need equipment – but is it better to rent or buy?

Mark Jones, Commercial Tearout Services, says the Rip-R-Stripper not only got his employees off their knees, it also removed tile at least twice as quickly as hand-held rotary hammers.

Putting the Rotary Hammer Down for Tile Removal Project

Spokane contractor uses the CTS12 Rip-R-Stripper for fast floor-covering removal on project where ride-on equipment wasn't an option.

SG24GHM

SG24EM

SG24E3HP60M

SG24E3HP50M

SG12EM

These fans feature direct-drive, three-speed motors and are deigned for general construction, demolition, oil and gas and other non-hazardous industrial work environments.

General Equipment Releases New TEMP-BUST-R Ventilation Fans

These fans feature direct-drive, three-speed motors and are designed for general construction, demolition, oil and gas and other non-hazardous industrial work environments.

The BITTYBREAKER Manual Impact Breaker

Brochure: Surface Preparation Equipment: The BITTYBREAKER Manual Impact Breaker

Download the brochure for the 102 BITTYBREAKER: Cut asphalt, tamp dirt, break concrete or frozen ground, chop roots or use it to remove stubborn ceramic tiles or brick pavers.

Conc Spec Guide Image

A Specification Guide on 23 Concrete Saws

Specifications and technical data to help you choose your next concrete saw.

General Equipment Ara Cts10

[VIDEO] General Equipment Introducing 11 New Products in 2020

General Equipment Company has plans to introduce 11 new products in 2020 and highlights a few of the new products already on the market.

1660628632 10881579

Video: General Equipment CTS12 Rip-R-Stripper Floor Tile Remover

The CTS12 Rip-R-Stripper from General Equipment for demolishing ceramic floor tiles uses a direct-impulse force breaks through high bond strengths of mastics, glues and thin-set materials

Fill out the form below to request more information about General Equipment Company

These fans feature direct-drive, three-speed motors and are deigned for general construction, demolition, oil and gas and other non-hazardous industrial work environments.

General Equipment Releases New TEMP-BUST-R Ventilation Fans

These fans feature direct-drive, three-speed motors and are designed for general construction, demolition, oil and gas and other non-hazardous industrial work environments.

242 H Hole Digger

General Equipment Co. 242H One-Man Hole Digger

General Equipment Company’s 242H one-man hole digger includes a variety of professional-duty features that make it ideal for both contractors and homeowners.

The low-speed surface grinders are compatible with a range of magnetic type attachments, including those in General’s MAGNETACH Tooling System or attachments utilizing the Lavina/EDCO magnetic mount tooling.

General Equipment M-Series Surface Grinders for MAGNETACH Tooling System

The low-speed surface grinders are compatible with a range of magnetic type attachments, including those in General’s MAGNETACH Tooling System or attachments utilizing the Lavina/EDCO magnetic mount tooling.

Concrete Contractor's 2023 Top Products Winners

Award winners of Concrete Contractor magazine's 2023 Top Products.

The Power-FLEX composite operator handles are exclusive to the EPIC Series, providing control, strength and balance during operation, while dampening vibrations.

General Equipment EPIC Series Two-man Hole Diggers

The Power-FLEX composite operator handles are exclusive to the EPIC Series, providing control and balance during operation, while dampening vibrations.

The FCS10GEN2 is compatible with various 10-in. wide straight and scoring type blades for use on wood and concrete surfaces.

General Equipment FCS10GEN2 Floor Covering Stripper

The FCS10GEN2 is compatible with various 10-in. wide straight and scoring type blades for use on wood and concrete surfaces.

The BITTYBREAKER Manual Impact Breaker

Brochure: Surface Preparation Equipment: The BITTYBREAKER Manual Impact Breaker

Download the brochure for the 102 BITTYBREAKER: Cut asphalt, tamp dirt, break concrete or frozen ground, chop roots or use it to remove stubborn ceramic tiles or brick pavers.

The ventilation fans are designed with performance features for a wide variety of applications and industries, such as general construction, demolition, oil and gas and other non-hazardous industrial work environments.

General Equipment Expands TEMP-BUST-R Ventilation Fan Series

The ventilation fans are designed with performance features for a wide variety of applications and industries, such as general construction, demolition, oil and gas and other non-hazardous industrial work environments.

The SP8GH9HP Hellcat Series Surface Planer

The SP8GH9HP Hellcat Series Surface Planer

The SG24EM M-Series Surface Grinder from General Equipment

The SG24EM M-Series Surface Grinder

The 190M installs on most standard motor grader moldboards or dozer blades. One stationary jaw and one vertically adjustable jaw can accommodate variable clamping heights from 13 to 28 inches in height

General Equipment 190M Cut-R-Tach

The 190M installs on most standard motor grader moldboards or dozer blades. One stationary jaw and one vertically adjustable jaw can accommodate variable clamping heights from 13 to 28 inches in height.

The BITTYBREAKER Manual Impact Breaker

The BITTYBREAKER Manual Impact Breaker

Compatible with a multitude of jackhammer tools, the hand-held BITTYBREAKER offers a powerful impact energy to effectively break concrete or frozen ground, cut asphalt, tamp dirt, chop roots, or remove ceramic tiles and brick pavers.

Always consult your machine's operator’s manual for details on the specific surface grinder being used.

Basic Guidelines on Choosing the Right Surface Grinder Attachment

There’s no substitute for experience, but these basic guidelines can help with choosing the proper type of attachment for your surface grinder.

Successful Surface Grinding - What to Know

Simplify the Daily Grind

Work smarter, not harder, with the right surface grinder. Here's what you need to know.

2350 Bor Max Augers

General Equipment Company 2350 Bor-Max Series Earth Augers

These new sizes are designed for use with General Equipment Company’s two-man EPIC Series hole diggers, plus competitive products utilizing 1-in. diameter auger drive connections.

Conc Spec Guide Image

A Specification Guide on 23 Concrete Saws

Specifications and technical data to help you choose your next concrete saw.

Fcs10 Gen2

General Equipment Company Second Generation FCS10 Floor Covering Stripper

The redesigned Gen 2 FCS10 offers new features for improved productivity, operator comfort, and ease of transport.

348H Hole Digger

General Equipment 332H and 348H EPICÔ Series Two-man Hole Diggers

General Equipment Company introduces its 332H and 348H EPICÔ Series two-man hole diggers, featuring 5.5-horsepower Honda GXV160 four-stroke engines, and raising the bar for performance, ease of use and safety.

The SG12EM Electric Grinder

The SG12EM Surface Grinder

The SG24EM Electric Grinder

The M-Series Electric Surface Grinder Line

General Equipment Db Series2

DB Series of Dust Collection Bags

General Equipment Company's DB Series of Dust Collection Bags attach to confined space ventilation blowers for extracting airborne dust created by drilling, sawing, sanding, chopping or other jobsite activities.

General Equipment Company AF501 AIR-SCRUB-R Portable HEPA Air Filter

General Equipment Company AF501 AIR-SCRUB-R Portable HEPA Air Filter

This compact, efficient unit delivers air scrubbing/negative pressure air movement capabilities.

Sg7 Surface Pro

The SG7 SurfacePro Edge Grinder

The SG7 edge grinder is a compact solution for various jobs that anyone can use.

General Equipment Company Introduces MAGNETACH Line of Surface Preparation Accessories

The M-Series DIAM-A-TACH diamond segment grinding system offers a solution for a wide variety of surface preparation applications, including green concrete, fully cured concrete, high tensile epoxies and many thin-film coatings.