Wagman Metal Products Metal Diamond Tooling for GHP System

New metal tooling with grit levels 40, 70, and 150 have been added to the Wagman Revolution GHP System.

April 2, 2018

Wagman Metal Products, Inc.

70 Metal 11inch

New metal tooling with grit levels 40, 70, and 150 have been added to the Wagman Revolution GHP System. Wagman Metal Products Inc., a manufacturer of power trowel replacement blades, pans and innovative trowel attachments for scrubbing, stripping, and polishing, introduces new metal diamond tooling for the GHP System.

The metal tooling allows for faster and more economical removal of the top surface layer.
The durable metal bond is aggressive while lasting much longer than the hybrid tooling.
The 40 metals will help process to the medium to large aggregates while the 150 metals will stay more in the cream.
The metal tooling can be used on 36” and 46” walk-behinds as well as 6’ and 8’ ride-on power trowels.
The 11” size can be used on the Wagman LP230.

Fill out the form below to request more information about Wagman Metal Products Metal Diamond Tooling for GHP System

When slabs on ground are polished, non-uniform exposure of aggregate is a result of high spots cause by slab curling. Deflection of many suspended slabs exceeds the upward movement at curled slabs, so polishing may result in even larger areas that exhibit such non-uniform aggregate exposure.

Why Polishing Suspended Concrete Slabs is More Likely to Disappoint Customers

Polished-concrete specifications are based on experience with slabs-on-grade, so contractors must help project owners understand how results will likely vary when polishing suspended slabs

The official introduction of Allen by Messersì products into the North American market will occur at the 50th Annual World of Concrete tradeshow.

Allen Engineering Announces North American Messersì Partnership

The partnership will bring Allen by Messersì tracked buggies and tracked dumpers to North America.

Best Practices For Exposed Glass Aggregate With Polished Concrete

Best Practices: Polishing Over Glass Aggregate

In search of a best practices standard for the surface broadcast of glass aggregate on concrete flatwork, a field study evaluated installation techniques, how to deal with adverse conditions, and the troubleshooting of and repair of common issues.

Your slurry management plan should address containment of slurry leaks and spills, such as the use of jute mesh, above, floc logs, and absorbent socks or pads.

How to Properly Handle Concrete Slurry

The rules governing the disposal of concrete slurry created during polishing, cutting and grinding can be murky without a set of guidelines to follow.

Adobe Stock 190729587

Top 5 Trends in Concrete Flooring

Contractors should understand and embrace these five trends in concrete flooring to offer homeowners more than a functional flooring solution.

Concrete's Sustainability Will Be Key to the Future of Construction

Concrete's Sustainability: Will Concrete Continue To Play A Role In The Future Of Construction?

As the industry reduces emissions and improve circularity, concrete’s persistence and strength will likely drive the continued use to build safe, durable, and resilient structures.

Check tool holder and grinding head for cracks or other visible damage. Replace any damaged parts.

How to Properly Maintain Your Grinder

Your grinder is a capital investment, and it is important to get the best ROI from it.

“Edges could double your price if you have a lot of small rooms on a project,” says Harry Gressette.

12 Tips for Bidding Concrete Polishing Jobs

Uncover the hidden costs of the project before submitting a bid.

Picture1 64906c3b9101e

Scraper Tooling Can Be Confusing

National Flooring Equipment is proud to offer a wide selection of scraper tooling, but sorting through the options can be a daunting task. Learn where to start and how to get your tooling questions answered.

There are a variety of ways concrete dyes can be applied, however, typically a high-volume low-pressure (HVLP) sprayer is the best applicator.

How to Apply Concrete Dyes When Grinding & Polishing

Learn the basics of dyeing concrete during the grinding and polishing process.

Decorative Metallics Big Bea 11486354

The Evolution of Metallic Effects in Decorative Concrete

Concrete Floor Grinding Troubleshooting

Troubleshooting Your Floor Grinder

Tooling and maintenance tips for concrete grinding and concrete polishing.

Featuring Ameripolish’s SmartFloor Refinement System Abrasives and SR2 sealer, the entire process can be run wet so facilities can remain open during the day while floors are refreshed overnight.

Ameripolish SmartFloor 3-step Recovery Solution

Featuring Ameripolish’s SmartFloor Refinement System Abrasives and SR2 sealer, the entire process can be run wet so facilities can remain open during the day while floors are refreshed overnight.

Misconceptions About Polished Concrete

The 5 Things People Don't Understand About Polished Concrete

Exploring some of the common misconceptions about polished concrete and clearing up any misunderstandings.

Concrete Contractor Develops GoldiLox Concrete Slab Protection System

Concrete Contractor Develops Concrete Slab Protection System

A concrete contractor created their own concrete floor protection solution designed to allow contractors to keep their concrete slab safe as construction continues.

Allen Engineering

Allen Engineering Adds Tooling Solution to Polishing System, via Concria

The system consists of high-quality diamond discs that are attached by flexible mounting pads directly to trowel blades, allowing for maximum diamond contact across both high and low spots.

Why You Should Not Strip and Wax A Polished Concrete Floor

Don't Strip & Wax Polished Concrete Floors, Here's Why

It may seem like a no-brainer to wax and strip on polished concrete, but it's the wrong choice for polished concrete.

The DiamaPro Systems ROG-60 Ride-On Concrete Grinder and Polisher

The DiamaPro Systems ROG-60 Ride-On Concrete Grinder & Polisher

The DP-ROG-60 ride-on grinding and polishing machine was engineered specifically for the concrete prep and polishing contractor.

Lavina 30 Gek 30 Ge

Lavina L30GEK Concrete Grinder & Polisher

The biggest challenge with edge work on a polished floor is achieving the same depth of cut and overall look as the main part of the floor.

Don't Let Bad Edging Ruin a Good Polished Concrete Floor

Edging is the key to a winning polished concrete floor, but you need the right knowledge, the right tools and the right attitude to achieve success.

Pc Tech Pg820 Grinding 10832784

Back to Basics Part 1: Material Removal

Learn how to choose the right grinder and abrasives you need to properly restore an old concrete floor for a concrete polishing application or other decorative concrete installation.

Custom Polished Concrete Honors Immigrant Heritage

Polishing Concrete Contractor Makes the Best From Hydraulic Oil Stains

The creative mind of Troy Vancil, a polished concrete contractor, makes a one-of-a-kind artwork to commemorate a Kansas family’s history.

Densify & Cure Concrete In One Step With PROSOCO's DensiKure

Fast and effective

Fast and effective

What to do if roads are worn out? If only the top layer is damaged, only that layer needs to be repaired. Take advantage of innovative solutions.